OVERVIEW

Fighting Stubborn Moisture and No Floor Drain? This 140 Pint Commercial Dehumidifier with Pump Pulls Water Fast and Keeps Jobsites Dry and On Schedule

Moisture problems don’t usually show up quietly. One day it’s damp air and a faint odor, the next it’s swollen trim, slow-drying materials, or worse. The AQUATRAP 150C from Abatement Technologies is a commercial dehumidifier with pump designed for the kind of environments where drying speed, consistency, and reliability truly matter.

With the ability to remove up to 150 pints of moisture per day, this unit sits right in that proven “workhorse” category professionals depend on. Restoration teams use this level of capacity to keep evaporation moving and to help prevent secondary damage before it starts — things like warping, peeling finishes, and microbial growth. It’s not just about pulling water from the air; it’s about keeping conditions stable so the entire drying process stays on track.

On remodeling sites, the moisture load can build quickly. Fresh concrete, joint compound, paint, and recently cleaned surfaces all release humidity into the space. A commercial dehumidifier like the AQUATRAP 150C helps maintain steady relative humidity, which supports faster material curing and protects new finishes from moisture-related setbacks. Smaller units often struggle to keep up in larger areas, but this size strikes a solid balance between power and mobility.

Then there’s the pump — and honestly, that’s where a lot of the day-to-day convenience comes in. Jobsites don’t always have a nearby floor drain, and gravity isn’t always on your side. The built-in centrifugal pump moves condensate vertically and across longer distances, so water can be directed to a sink, tub, or remote drain. That flexibility means you can place the unit where airflow is most effective, not just where a drain happens to be.

Continuous pumped discharge also means fewer interruptions. No buckets to empty. No surprise shutoffs in the middle of a drying cycle. The unit keeps working, even on long, 24/7 runs where multiple gallons of water can be collected each day. For crews focused on getting a space dry and back to normal, that kind of consistency makes a real difference.

Facilities like storage buildings and warehouses benefit too. Keeping humidity in that safe mid-range helps protect contents from mold, corrosion, and long-term moisture exposure. Many commercial dehumidifiers are used to maintain those conditions across large, open areas, and a 150-pint capacity provides the strength to recover quickly after weather shifts or frequent door openings.

The AQUATRAP 150C simply does what it’s built to do — remove moisture efficiently, run reliably, and give you more freedom in where and how you set up your drying equipment. When the air needs to dry fast and stay that way, it’s the kind of performance professionals count on.

SPECIFICATIONS

FEATURES

• 140 Pint High-Capacity Moisture Removal for Faster Structural Drying
  Designed for demanding restoration, remodeling, and large-space humidity control, this unit delivers strong daily moisture removal to help keep evaporation rates high. That means quicker dry-down times, better protection for building materials, and less risk of mold or secondary damage.
  
  
• Built-In Centrifugal Pump for Continuous Drainage
  The internal pump automatically pushes condensate vertically and across longer distances to a sink, tub, or remote drain. You won’t need to stop and empty a tank, which keeps the unit running 24/7 and gives you flexibility to place it where airflow is most effective.
  
  
• Built-In WiFi with App Control for Real-Time Monitoring
  Stay connected to your drying equipment without being on site. The integrated WiFi and AT Dry App let you check performance, track conditions, and make adjustments from anywhere, helping you manage multiple commercial dehumidifiers across jobs with less guesswork and fewer trips.
  
  
• Soft-Start Compressor for Reliable Operation
  The soft-start cycle reduces the electrical load at startup, helping prevent breaker trips and making the unit easier to run on shared jobsite circuits. It’s a small detail that makes a big difference on busy projects.
  
  
• Jobsite-Ready Design for Easy Transport and Setup
  Front and top lifting handles make moving the unit simpler, even in tight or partially demoed spaces. A folding handle tucks out of the way during operation or storage, and units can be stacked two high to save valuable truck and storage space.
  
  
• Fast Maintenance with Tool-Free Filter Changes
  Routine upkeep is quick and straightforward. Filters can be swapped out without tools, so crews can keep airflow strong and equipment running efficiently without slowing down the job.
  
  
• Durable, Protected Controls for Tough Environments
  A recessed control panel helps shield settings from bumps and debris, while quick-connect fittings on the discharge hose make setup fast and secure. Built to meet CSA and UL standards, it’s made for the realities of daily commercial use.

PRODUCT SHEETS

Manual